BenQ TW526E - User Manual

Questions and Answers

S
Sara ThomasAug 11, 2025
Why won't my BenQ TW526E turn on?
- J
  Jacqueline HollandAug 11, 2025
  If your BenQ Projector isn't turning on, start by checking the power connections. Ensure the power cord is securely plugged into both the AC inlet on the projector and the power outlet, and that the power outlet switch is on, if applicable. Also, if you've recently tried turning it on and it didn't work, it might be in the cooling process. Wait until the cooling down process has completed before attempting to turn it on again.
M
marygonzalezAug 18, 2025
What to do if my BenQ TW526E Projector has no picture?
- J
  Jimmy PotterAug 18, 2025
  If your BenQ Projector isn't displaying a picture, several things could be the cause. First, ensure that your video source is turned on and the signal cable is correctly connected. Check that the projector is correctly connected to the input signal device. Also, make sure the correct input signal is selected using the SOURCE key on the projector or remote. Finally, verify that the lens cover is open.
L
lmyersAug 26, 2025
How to fix a blurred image on my BenQ Projector?
- K
  Kevin Martinez MDAug 26, 2025
  To fix a blurred image on your BenQ Projector, begin by adjusting the focus of the lens using the focus ring. Also, make sure that the projector and the screen are aligned properly; adjust the projection angle, direction, and height of the unit if needed. Finally, ensure that the lens cover is open.
R
Ryan JamesSep 2, 2025
What to do if the BenQ TW526E Projector remote control does not work?
- D
  Dustin GonzalesSep 2, 2025
  If your BenQ Projector's remote control isn't working, try these steps: First, replace the battery with a new one. Then, make sure there isn't anything blocking the path between the remote and the projector. Finally, ensure you are within 8 meters (26 feet) of the projector.

BenQ TW526E Specifications

General

Brightness	3200 ANSI Lumens
Contrast Ratio	13000:1
Lamp Life (Normal)	4000 hours
Lamp Life (Economic)	6000 hours
Lamp Life (LampSave)	10000 hours
Display Technology	DLP
Input Lag	16 ms
Keystone Correction	Vertical: ±40 degrees
Noise Level (Economic)	29 dB
Power Consumption (Standby)	0.5 W
Zoom Ratio	1.1x
Aspect Ratio	16:10
Noise Level (Normal)	33 dB
Input Connectors	HDMI, VGA, USB, Composite
Output Connectors	Audio Out
Power Consumption (Economic)	260W
Operating Temperature	0°C to 40°C
Operating Humidity	10~90%