Need help?Do you have a question about the BenQ V7050i and is the answer not in the manual?
General| Matrix size | 0.47 \ |
|---|---|
| Matrix type | DMD |
| Native aspect ratio | 16:9 |
| Vertical scan range | 23 - 120 Hz |
| Horizontal scan range | 15 - 135 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | - |
| Screen size compatibility | 70 - 123 \ |
| Projector native resolution | 2160p (3840x2160) |
| Keystone correction, vertical | -30 - 30 ° |
| Offset | 149 % |
| Throw ratio | 0.252:1 |
| Fixed focal length | 2.45 mm |
| Supported 3D formats | Frame packing, Side by side, Top and bottom |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p |
| Supported graphics resolutions | 640 x 480 (VGA), 3840 x 2160 |
| Noise level | 34 dB |
| Number of OSD languages | 28 |
| Operating system version | 9.0 |
| Operating system installed | Android |
| Noise level (economic mode) | 29 dB |
| High Dynamic Range (HDR) technology | High Dynamic Range 10 (HDR10), Hybrid Log-Gamma (HLG) |
| DVI port | No |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 3 |
| Component video (YPbPr/YCbCr) in | 0 |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Bluetooth version | 4.2 |
| Internal memory | 16 GB |
| RMS rated power | 10 W |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 480 W |
| Operating altitude | 0 - 3000 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Remote control type | IR |
| Product type | Ultra short throw projector |
| Product color | Black |
| Market positioning | Home cinema |
| Light source type | Laser |
| Service life of light source | - h |
| Harmonized System (HS) code | 85286200 |
Weight and Dimensions| Depth | 388 mm |
|---|---|
| Width | 500 mm |
| Height | 157 mm |
| Weight | 10000 g |
Guidance for projector installation with a 16:9 aspect ratio screen.
Table detailing image size, projection distance, and vertical offset.
Advice on physical testing and dealer consultation for optimal installation.
Details on resolution, display system, lens, and light source.
Information on power supply, voltage, frequency, and consumption.
Details regarding the projector's weight.
Description of audio output and speaker specifications.
Information on USB and RS-232 serial control ports.
Details on video signal input, specifically HDMI.
Operating and storage conditions, including temperature and humidity.
Recommendation for original or equivalent packaging.
Guidance on finding service contact information via website.
Product classified as Risk Group 2 according to IEC 62471-5:2015.
Product is CLASS I laser product complying with IEC 60825-1:2014.
Advisories on avoiding eye exposure to the laser beam and supervised use.
Access user manuals in various languages from the official BenQ website.
To Next Page
