28 How to adjust your monitor
b. Go to the setup menu in your game, and change the frame rate or screen refresh rate to
120 Hz. Refer to the Help document that came with your game for details.
To check if the screen refresh rate has been changed, select Menu from the hotkey menu
on your monitor, and go to System and Information. The refresh rate in both Current
Resolution
and Optimum Resolution should be 120 Hz.
2. Select a desired display mode. See Adjusting display mode on page 30.
3. Resize your display by Smart Scaling. See Using Smart Scaling on page 30.
4. Select an appropriate game mode for your game. FPS is for FPS games, while RTS is for
RTS games.
5. Adjust the brightness of your display. See Brightness (during 2D playback) / NVIDIA® 3D
LightBoost™ (during 3D playback) on page 35.
6. Adjust the brightness of the black shades by Black eQualizer. See Black eQualizer on
page 36.
7. Adjust the monitor height. See Adjusting the monitor height on page 13.
If 120 Hz is not available in your menus, check the following:
• make sure the DVI-D Dual Link cable is properly connected to your computer and the monitor
• make sure your GPU supports 120 Hz
• make sure your game supports 120 Hz.