8 How to assemble your monitor hardware
How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item
like the monitor packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean padded surface.
While holding the monitor firmly against the desk,
pull the monitor stand arm upwards clear of the
monitor.
Orient and align the stand base socket with the end
of the stand arm, then push them together. Tighten
the thumbscrew on the bottom of the monitor
base as illustrated.
Gently attempt to pull them back apart to check
that they have properly engaged.
To Next Page
Loading...
Need help?
General
