14 How to assemble your monitor hardware
4. Connect the headset.
Connect the headphone connector of your headset
to the headphone jack found on the left side of the
monitor.
Connect the audio cable between the PC and the
monitor (via the Mic-In jack at the back). And then
connect your microphone connector on the
headset to the microphone jack at the left side of
the monitor.
The headphone jacks work only when the audio source is
HDMI or DisplayPort.
You may connect the headphones to the headphone jack
found on the left side of the monitor.
5. Using the headphone hook.
Push to release the headphone hook found on the
left side of the monitor ( ). And pull out the
headphone hook ( ).
Leave your headset on the headphone hook if
needed.
The maximum load capacity of the headphone hook is 400g.
To Next Page
Loading...
