BV200 Plasma Viscometer Mk2/3 Customer User
Manual
Issue 9
th
Sep 2020 - Rev 1.8 Page 11 of 53
The Viscometer contains a laser
reader
The laser reader beam used by viscometer
barcode readers has a low power output.
Do not look directly into the beam.
The laser is a class 2 product with a maximum
output radiation of 1 mW. The emitted
wavelength is 630-680 nm to IEC 825-1 (1993)
Waste bottle for the Viscometer
contains Biohazard products
The Waste bottle and its contents should be
treated as hazardous and handled according to
your organisation's health and safety policy.
When carrying out the scheduled sterilise
maintenance process on the waste bottle, always
wear suitable safety clothing as indicated in your
organisation‟s health and safety policy.
In the UK it is recommended to follow the
Committee of Substances Hazardous to Health
(COSHH) requirements for the chemicals used in
your organisation.
General use of the Viscometer for
measuring viscosity on Blood Plasma
Please follow the instructions provided in this
document when using the BV200, failure to
follow these instructions could cause harm, injury
or illness.
The company cannot be held responsible for any
unwanted effects that arise from misuse.
To Next Page
Loading...