BV200 Plasma Viscometer Mk2/3 Customer User
Manual
Issue 9
th
Sep 2020 - Rev 1.8 Page 24 of 53
Follow the on-screen instructions to empty/refill the waste and wash bottles 2.
The waste container and contents should be
considered a biohazard.
It is recommended that Benson Viscometer cleaning
agents are used.
a. When using Benson Viscometers cleaning agents
i. Select “Single” or “Bulk” additive as appropriate
ii. Select “Scan Barcode”, Then scan the barcode on the single use tube or bulk
additive, using the viscometer handheld barcode scanner
iii. Alternatively enter the barcode manually by selecting “Manual Entry” and use the
keyboard to type the barcode from the single use tube or bulk additive
iv. When complete select “Click to Proceed”
To Next Page
Loading...