bentrup TC 505 Technical Manual

4
DO......................digital output (e.g. switching output)
DI........................digital input (e.g. status input)
AO......................analog output (e.g. 0-10V output)
AI........................analog input (e.g. measure input)
The number following this designator specifies the input/output. Examples:
DO 0.0................1st switching output of the controller
DO 0.1................2nd switching output of the controller
AI 0.0 ..................1st analog input (e.g. thermocouple) of the controller

bentrup TC 505 Specifications

General

Brand	bentrup
Model	TC 505
Category	Controller
Language	English