bentrup TC44 - User Manual

Bedienungsanleitung
Operating Instructions
Die neue bentrup Kompaktserie. Perfektion vom Marktführer.
TC 66
TC 88
TC 44

bentrup TC44 Specifications

General

Type	Temperature Controller
Display	LCD
Inputs	Thermocouple, Pt100
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 70°C
Relative Humidity	Max 80% non-condensing
Protection Class	IP20
Dimensions	96 mm x 96 mm
Supply Voltage	230 V AC, 50/60 Hz
Power Supply	230 V AC, 50/60 Hz

Summary

Programme Controller TC44

Adjusting and Starting a TC44 Firing

Guides on setting up and initiating a firing process on the TC44 controller.

Setting TC44 Heat Up Rate and Temperature

Setting TC44 Dwell Time and Starting Firing

Programme Controller TC66

Selecting and Starting a TC66 Programme

Adjusting TC66 Firing Curves

Programme Controller TC88

Entering a TC88 Programme Example

Entering TC88 Segment Time and Temperature

Completing TC88 Firing Curve Entry

Starting the TC88 Firing Process

TC88 Readings and Modifications During Firing

Manual TC88 Process Control Options

Additional Information for Controllers

Controller Error Messages and Causes

Lists common controller error messages, meanings, and causes.

Error Messages: Over Temp and Heating Issues

Internal Controller Faults Requiring Service

Operating Parameters and Configuration

Accessing and Adjusting Operating Parameters

Guides on accessing and modifying operating parameters via programme key.