Need help?Do you have a question about the bentrup TC 500 Series and is the answer not in the manual?
Instructions for starting, saving, and locking programmes.
Description of buttons for navigation, input, and control.
Components for setting segment parameters like temperature and time.
How to enter temperature ramp rates or time.
Setting the target temperature at the end of a ramp.
Defining the duration for holding a specific temperature.
Setting up the first segment with ramp and dwell parameters.
Inputting the rate of temperature increase for a segment.
Setting the target temperature at the end of a ramp.
Procedure to save a current firing curve as a programme.
Steps to load and activate previously saved programmes.
How to begin a programmed firing process.
How to lock the keypad to prevent unauthorized operation.
How severe errors affect the firing process.
Details on sensor input errors and their causes.
Explains the 'policeman activated' error related to over-temperature.
Instructions on how to access and view logged data.
How to retrieve and view recorded error messages.
A table of parameters, their default values, and units.
Crucial warnings about potential damage from incorrect parameter changes.
How the controller responds to heating issues.
Detailed pinout configurations for different connector types.
Critical warning about matching thermocouple type to controller input.
Instructions for starting, saving, and locking programmes.
Description of buttons for navigation, input, and control.
Components for setting segment parameters like temperature and time.
How to enter temperature ramp rates or time.
Setting the target temperature at the end of a ramp.
Defining the duration for holding a specific temperature.
Setting up the first segment with ramp and dwell parameters.
Inputting the rate of temperature increase for a segment.
Setting the target temperature at the end of a ramp.
Procedure to save a current firing curve as a programme.
Steps to load and activate previously saved programmes.
How to begin a programmed firing process.
How to lock the keypad to prevent unauthorized operation.
How severe errors affect the firing process.
Details on sensor input errors and their causes.
Explains the 'policeman activated' error related to over-temperature.
Instructions on how to access and view logged data.
How to retrieve and view recorded error messages.
A table of parameters, their default values, and units.
Crucial warnings about potential damage from incorrect parameter changes.
How the controller responds to heating issues.
Detailed pinout configurations for different connector types.
Critical warning about matching thermocouple type to controller input.
General| Brand | bentrup |
|---|---|
| Model | TC 500 Series |
| Category | Controller |
| Language | English |
To Next Page
