3x - 5x
Turn the adjustment
screw
Test
Pulling the lever all the way to the
handlebar should be impossible.
Change the reach of brake levers
Brake problems
Braking is ineffi cient - lever action is delayed
Press the lever several
times ("pump") until
it you have full brake
power
Test it before the ride
... "Pump" the fl uid before the ride
If the problem persists, it is likely
that there is air in the hydraulic hose.
Bring your bike to the dealer to
remove the air ( bleeding).
In addition, check the brake pads and
replace if worn.
To Next Page
Loading...