BEP 720-MDO User Manual

INTRODUCTION:
The 720-MDO is a high current, remotely activated battery switch. This allows convenient operation with
the remote switch within easy reach of the user, and the battery switch positioned where cable runs are
minimized.Reducedcablerunsallowsmallersectioncabletobeused,resultinginsignicantreductions
in cable cost, plus weight savings.
As well as remote, motorized operation, the 720-MDO can be manually over-ridden. From the “Manual
Off” position, the switch knob can also be removed, providing security, particularly during servicing.
Designed and constructed for longevity in the marine environment with tinned copper conductors, stainless
steelnutsandhightemperature,brereinforcedplastics.Theunitsareignitionprotected,provideOn/Off
switching operation, and may be recessed or surface mounted.
The Version 8 printed circuit boards include the latest developments in digital circuitry, and optical position
sensing.Theseresultinsignicantimprovementstovoltagemeasurementcircuits,switchoperation,and
provide low power consumption.
Motorised Battery Switch
Model: 720-MDO (Version 8)
OPERATION AND INSTALLATION INSTRUCTIONS

BEP 720-MDO Specifications

General

Brand	BEP
Model	720-MDO
Category	Switch
Language	English