13
EN
12
EN
Removing the micro motor
Disassembling the hand piece
• Loosen knurled nut by turning left
• Caution! Do not turn the plastic lid
Incorrect opening may damage connector pins on the micro
motor
Caution: Please mind the micro motor‘s connection pins
Disassembling the hand piece
• Pull motor with hand piece cover out of motor sleeve
• The motor may now be pulled from the hand piece cover
Regular hand piece maintenance ensures a reliable clamping of the burr/mandrel
• Remove burr/mandrel from
hand piece
• Unscrew handle sleeve
• Unscrew bearing bushing
and pull forward
To Next Page
Loading...