27
ENGLISH
8.5 Safety stop
If there are ignition faults or boiler operation malfunctions, carry out a "SAFETY STOP". On
the display, in addition to the fault code, the icon is also displayed, which blinks with a
frequency of 0.5sec ON and 0.5sec OFF.
The backlight blinks for 1min after which it switches off, while the icon continues blinking.
On the 4 digits a message scrolls containing the error code and its description .
DAY
8.6 Reset function
The “RESET” icon comes on when there is an alarm that requires a manual reset by the user
(for example ame lockout). To reset the lockout press key 2 RESET.
DAY
RESET
If the release attempts do not restart the boiler, contact your local Technical Assistance
Centre.
9 MALFUNCTIONING (see "4.19 Lights and
faults")
To Next Page
Loading...
