Need help?Do you have a question about the Beretta Power X 50 DEP R.S.I. and is the answer not in the manual?
General| Fuel Type | Natural Gas / LPG |
|---|---|
| Heat Output (kW) | 50 |
| NOx Class | 5 |
| Max working pressure | 3 bar |
| Max temperature | 90°C |
| Type | Condensing |
Details the directives and standards the Beretta POWER X boilers comply with.
Provides essential safety guidelines for operating and installing the boiler.
Lists critical precautions to ensure safe boiler operation and prevent hazards.
Introduces the POWER X as a high-power, wall-mounted condensing boiler with various operating modes.
Identifies and illustrates key components and their functions within the boiler.
Specifies the physical dimensions and connection points of the boiler unit.
Details the internal water flow paths, with and without a diverter valve.
Explains the layout and functions of the boiler's user interface and control buttons.
Provides detailed technical data, performance metrics, and efficiency ratings for the boiler models.
Describes the high-efficiency modulating circulator and its operating modes and features.
Illustrates the complex electrical connections and component wiring for the boiler system.
Outlines the mandatory standards, local regulations, and personnel qualifications for boiler installation.
Covers essential installation requirements, safety warnings, ventilation, and frost protection measures.
Details procedures for system cleaning, air elimination, and water characteristics before boiler installation.
Guides on correctly positioning the boiler and making all necessary hydraulic connections.
Provides instructions for correctly installing the optional outdoor sensor for climate control.
Covers essential guidelines for safe and compliant electrical wiring and gas supply connections.
Presents various hydraulic circuit diagrams and details on required connection kits for different setups.
Explains the requirements for flue gas discharge and air intake for different installation types.
Addresses the use of old flue pipes and the proper preparation for condensate drainage.
Details the procedures for filling and emptying the heating system, including air purging.
Explains how to turn the boiler on/off and select between SUMMER and WINTER operating modes.
Guides on connecting and setting the domestic hot water storage tank and temperature.
Lists essential checks and steps before initial boiler ignition and operation.
Explains how to turn the boiler on/off and select between SUMMER and WINTER operating modes.
Guides on connecting and setting the domestic hot water storage tank and temperature.
Details how to adjust the heating water temperature using controls without an external probe.
Explains how to adjust heating temperature using an external climate control probe.
Describes how to monitor the boiler's operating status and view system information on the display.
Explains how to view and adjust the set temperatures for heating and domestic hot water.
Guides on accessing and using the monitor function to view various system parameters.
Lists common error codes, their meanings, and troubleshooting steps for the boiler's self-diagnostic system.
Details how to enter test mode and perform adjustments for burner power and combustion settings.
Explains the procedure for converting the boiler from methane to LPG gas, including necessary settings.
Outlines the mandatory annual tasks for maintaining the boiler's performance and safety.
Describes special maintenance tasks for restoring operation after faults or for specific repairs.
Details the process for analyzing combustion efficiency and adjusting settings.
Guides on accessing and modifying parameters within the installer level of the boiler's programming.
Explains access to factory-level parameters for protected settings and configurations.
Describes how to use the monitor level to view various system parameters and sensor readings.
Provides a detailed list of all programmable parameters, their limits, default values, and specifications.
To Next Page