To Next PageTo Next Page
Need help?Do you have a question about the BERGER 359320 and is the answer not in the manual?
This TV set is designed exclusively for the reception and reproduction of picture and sound signals. It must not be operated in rooms with high humidity.
Hold the unit by the edges of the housing at the top and bottom. The display is made of glass or plastic and may break if handled improperly.
Incorrect voltages can damage the device. Use only the correct 12V unit connection cable or the enclosed power cord.
Use the CH+/- key and arrow key to switch channels, or 0-9 keys for direct channel selection.
Move and delete channels, create your own favourites list by pressing the FAV key.
Press the TEXT key to open and close Teletext for DVB-S/S2, DVB-T, DVB-C.
Press the EPG key to open the electronic programme guide and navigate the TV programme.
Check connections, power, and screen selection. Ensure the machine is switched on.
Check video input cable, screen selection, and proximity to magnetic devices.
Check video input voltage range and ensure video cables are correctly connected.
Check speaker connection, volume, and mute status.
Ensure the signal is not blocked and replace batteries if necessary.
Check upstream reception device settings and reconnect the unit after unplugging.
General