GB
CONNECTING TO THE CIGARETTE LIGHTER
NOTE!
If you connect the cooling unit to your vehicle‘s cigarette lighter, please note that you may
need to switch on the ignition to supply power to the unit�
CLEANING AND MAINTENANCE
WARNUNG!
Always disconnect the cooling unit from the power supply before cleaning and maintenance�
WARNING! RISK OF DAMAGE
• Never clean the cooling unit under running water or even in rinsing water�
• Do not use harsh cleaning agents or hard objects for cleaning�
• Clean the inside and outside of the cooling unit with a damp cloth�
• After cleaning, leave the lid open slightly to ensure adequate ventilation�
• Make sure that the ventilation openings of the cooling unit are free of dust and dirt so that
the heat generated during operation can be dissipated and the cooling unit is not damaged�
ATTENTION!
Disconnect the cooling unit from the battery when the engine is not running so that it is not
discharged�
Connect the cooling unit to 230 V
Connect the 100 - 240 V AC connection cable to the 230 V AC main supply�
22
To Next Page
Loading...
