GB
1. Switch on / off
• After you have plugged in the cool box, press to switch
the appliance on or off�
2. Temperature setting
• The preset temperature for the left cooling zone is -18°C, for the right zone at +5°C� Press the
corresponding button
or
to set the target temperature, the target value flashes on the
display� The temperature changes by one degree each time the button is pressed� Press and
hold the button to accelerate the change�
3. Max- / Eco-function
• Press the button
to switch between Max mode (fast cooling) and Eco mode (energy-saving
mode)� The corresponding LED lights up: The blue light stands for MAX mode, the green light
for ECO mode�
4. Settings menu
• In standby mode (appliance switched off but connected to the mains), press the
and
(Right Zone) buttons simultaneously for 3 seconds to access the settings menu, which contains
two functions: Pr (battery protection settings) and CF (°C/°F settings)� Press
to switch bet-
ween the battery protection settings and the °C/°F settings�
4.1. Battery protection setting
• When Pr appears on the display, press the
or
button (right zone) to select the protec-
tion level� 3 protection levels are available, „
“ stands for the medium level, which is also the
default value� „
“ means high level, „ “ means low level�
25
To Next Page
Loading...
