13
7 PRACTICAL ADVICE
Do not attempt to modify any of the parts or do not attempt to assemble them in any other way than indicated. Only use
manufacturer’s spare parts (available at your dealer).
Problem Reason Solution
Steam comes out from the underside
of the lid
1.The pressure cooker is not
correctly closed
2. Sealing ring is dirty.
3. Sealing ring is too old
1. Check and repeat the closing
method
2. Clean the sealing ring, cooker rim
and lid.
3. Change the sealing ring.
Lid can’t be xed properly The shape of the lid changed. Change the lid
Steam and liquid leaks from the
safety valve suddenly.
1. The steam-releasing pipe was
obstructed. The safety function of the
locking pin is working. The release
hole of pressure-limiting valve is
blocked.
2. The safety valve has lost its
function.
1. Take the cooker away from the re
and dredge the release hole. After it is
cool, take down the pressure-limiting
valve and clean the hole of pressure-
limiting valve.
2. Change safely open- preventing
valve.
When cooking, the sealing ring is
suddenly forced out from the safety
window and steam drain out.
1. The safety function of the sealing
ring is working. Maybe other device
has lost its function.
2. The sealing ring is aged and has
lost its function.
1. Take the cooker away from the re.
After it is cool, clean and check all the
safety devices. Change the ones which
have lost its functions.
2. Change the sealing ring.
The safety valve doesn’t rise 1. The lid is not in closed position
2. There is not enough liquid inside
the pressure cooker.
3. The rubber ring is dirty or
damaged.
4. The temperature of the cooker is
too low.
1. Close the lid properly.
2. Check and add the correct amount
3. Clear or replace it.
4. Turn up the heat.
To Next Page
Loading...