Bergstrom M487 - Page 10

10
B) Copying of MP3 file
If pung a MP3 disc instead of a CD-disc, the system will copy the les to the USB if press the
“ ” buon (4). The operaon procedures is same as CD encoding as spulate on above,
and the system will switch to copying mode only if MP3 le being read.
C) DAB encoding
1. Operate tuner mode refer above listening to radio section to receive the station you would
like to encode.
2. Press the “ ” button twice (4) until the unit will display flashing with “REC USB” icon.
Encoding is now performing.
3. After finish of recoding, press “stop ” button (3) until the symbol “REC USB” disappear.
D) Cassette/Phono/AUX-in/Bluetooth encoding
1) Plug in the USB pen drive for recording (make sure it had enough empty space).
2) Set the unit to your desired encoding mode by funcon buon (10) such as “tape” mode
or “phono/aux-in” or “Bluetooth”…etc. Search for the track you wish to record and set in
pause mode.
3) Then press the “ ” buon (4) twice. The LCD display (2) will ash with “REC USB”
icon.
4) Start playback the track of cassee tape or your external Aux device or Bluetooth device
that you prepare to encoding to MP3 format. Now the system is starng the encoding
mode.
5) Aer nishing of recoding, press “stop ” buon (3) unl the “REC USB” disappear.
E) track separation (On remote control only)
You can divide the recording music from tape or DAB…etc in to USB track by track during
encoding. Every me when press the “ ” (track separaon) buon (on remote control)
once during encoding from tape or Aux in, the system will generate a new track and
connuous the recording. The text “SAVE” at LCD display will ash one me, it mean the unit
is creang a new track successfully.
F) Copying of MP3 file
If pung a MP3 disc instead of a CD-disc, the system will copy the les to the USB if press the
“ REC” buon (3). The operaon procedures is same as CD encoding as spulate on above,
and the system will switch to copying mode only if MP3 le being read.
File delete at USB (by remote control)
The system is able to erase the le stored inside the USB pen drive by following:-
1． Insert the media storage and set at “USB” mode.
2． Press the “delete” buon and the LCD display (2) will show (del ---001)
3． Press skip forward or skip backward buon to select the le going to delete
4． Press the “delete” buon to enter “yes/no” mode and then press skip forward or
skip backward to select “yes” or “no”.
5． Press the “delete” buon again to conrm the seng.
Remark:
- Press “stop” buon once at remote handset to quite delete mode