Bergstrom M487 - Page 6

6
mode repeatedly. In parcular when stereo signals are weak, it is preferable to receive the
program in Mono.
⚫ If stereo signal is being received, the stereo indicator “ ” will appear on LCD display (2)
to show FM Stereo program is now receiving.
Hints for best recepon:-
- FM : the receiver work with detachable DAB/FM wire antenna, made sure the antenna
had plugged into the antenna socket (30) and place it on proper locaon for the best
recepon.
Bluetooth connecting and Playback
1. Press Funcon buon to select (10) to Bluetooth mode.
2. The LCD display (2) will flashing with “ Bluetooth “ , it means the BT is ready for connection
& under searching mode.
3. Switch on the Bluetooth feature of your BT device (such as mobile phone) and select
“ M487 ” on the BT equipment to connecting.
4. Once the connecting was finish and connect successfully, the word “ Bluetooth “ will be
remained without flashing on LCD display (2).
5. Start to playback your BT device and enjoy the music from the main unit.
6. To disconnect the Bluetooth connection, press and hold the “Play/Pause ” (16) button
Remarks
- You can press the “Play/Pause ” (16), “Skip Up or Skip Down button” (23/13) of
the main unit or remote to control the music playback.
Playing Compact Disc
⚫ Geng start
1. Press Funcon buon (10) to select “CD” mode.
2. Push the CD tray open (25) to open the CD tray.
3. Place a CD with the printed side facing up and then close the CD tray.
4. Focus search will perform and the LCD display (2) will show the total number of tracks &
total playing me. Then, the unit will start playback automacally.
5. Turn Volume knob (19) to the desired volume level.
⚫ Play/Pause mode
1. To interrupt, press the “Play/Pause ” buon (16) once; “PAUES” will show on the LCD
display (2). Press again to resume normal playback.
⚫ Stop mode
1. If “Stop ” buon (3) is pressed during play or pause mode, system will go to stop mode.
⚫ Skip mode (skip up /skip down )
1. During play or pause mode, if “skip up ” buon (23) is pressed. It will go to next track
and display the track no. and then remain the play or pause mode.
2. During play or pause mode, if “skip down ” buon (13) is pressed. It will go to the
previous track, original track no. is display and remains the play or pause mode.