21
· Run your index nger down the
skin just in front of your ear.
If you can touch the helix part
of the earmold, it is not inserted
correctly. Gently push it behind
the fold of your ear.
· Lift the hearing instrument into
place behind your ear. Be careful
not to twist the tubing.
Removing Your Nano BTE and Earmold
· Lift the instrument from your ear rst.
· Push the back of your ear with your thumb
to loosen the helix part of the earmold, then
use your index nger to remove it.
· Grasp the helix part of the earmold and twist
it forwards.
· Gently pull the earmold straight out of the
ear, holding on to the helix part of the mold.
Do not remove the earmold by pulling on the
hearing instrument. This could disconnect
the instrument from the earmold or damage
the tubing.
To Next Page
Loading...
Need help?
General
