53
NoWax System
The NoWax system is applicable for the following
acoustic setup:
· M-Speaker used with a dome or Lite Tip
· P-Speaker used with a Power Mold
If you are unsure about your acoustic setup, please
contact your hearing care professional to get the
relevant information.
Replace the wax protection on your sound outlet
by following this procedure:
Visually inspect the NoWax in the end of the
speaker. If it is clogged or there is no sound
coming from the device, replace the NoWax
lter.
Note that the NoWax is explained with a
M-speaker. The same procedure is also
suitable if you want to change the NoWax
on a Power Mold.
To Next Page
Loading...
Need help?
General
