66
About Start-up Handling Options Tinnitus Warnings More info
Technical information
The hearing aid contains the following
two radio technologies:
The hearing aid contains a radio
transceiver using short range magnetic
induction technology operating at
3.84 MHz. The magnetic field strength
of the transmitter is very weak and
always below 15 nW (typically below
–40 dBμA/m (–12.20 dBμA/ft) at
10 meters (33 feet) distance).
The hearing aid also contains a radio
transceiver using Bluetooth Low Energy
(BLE) and a proprietary short-range
radio technology, both operating at ISM
band 2.4 GHz. The radio transmitter is
weak and always below 9 mW equal to
9.6 dBm in total radiated power.
The hearing aid complies with
international standards concerning
electromagnetic compatibility and
human exposure. Only use your hearing
aid in areas where wireless transmission
is permitted.
Due to the limited space available on the
hearing aid, relevant approval markings
can be found in this booklet.
Additional information can be found in
the Product Information Sheet on
www.bernafon.com
USA and Canada
This device contains a radio module
(DA AU5 MNR R) with the following
certification ID numbers:
FCC ID: 2ACAHAU5MRTRC
IC: 11936A-AU5MRTRC
To Next Page
Loading...
Need help?
General
