8
T-Cap Filter for CICP, CICx, CIC, IICx, and IIC
The tool has two ends, one for the removal of the T-Cap (A) and one with the new
T-Cap attached (B).
1 Use the removal end (A) and push it under the top edge of the used T-Cap
2 Lift the used T-Cap up and out
3 Use the other end of the tool (B), insert the new T-Cap into the opening and slightly twist
the handle so that the new T-Cap is free
4 Discard the tool and the used T-Cap lter
AR_ILLU_miniBTE_T_Cap1_BW_Hi
7
A
B
AR_ILLU_miniBTE_TCap2_BW_Hi
8
A
AR_ILLU_miniBTE_T_Cap3_BW_Hi
9
A
AR_ILLU_miniBTE_T_Cap4_BW_Hi
10
B
1
2 3