28
Replace ProWax miniFit filter
1. Tool
Remove the tool from the
shell. The tool has two pins,
one empty for removal and
one with the new wax lter.
2. Remove
Push the empty pin into the
wax lter in the speaker and
pull it out.
New
lter
3. Insert
Insert the new wax lter using
the other pin, remove the tool
and throw it out.
4. Final
The speaker should look as
shown when you have
replaced the wax lter.
✻
If you use a mold, a hearing care professional must
replace the wax lter in the speaker.
To Next Page
Loading...
