Berner Architectural High Performance 10 User Manual

-10-
PLUS
AUTO
delu
Door opens: The air curtain and heater activate and run at set speed
Door shuts: The air curtain continues to run for a minimum of 60 seconds. If thermostat
is not satised, air curtain and heater continue to run until thermostat is satised. If
thermostat drops below set temperature, the heater and air curtain will run until
thermostat is satised.
Door opens: The air curtain activates
Door shuts: The air curtain continues to run for a minimum of 60 seconds
Door opens: The air curtain activates
Door shuts: The air curtain turns o
Door opens: The air curtain activates
Door shuts: The air curtain continues to run
Door opens: The air curtain is o
Door shuts: The air curtain is o
OFF
5 Standard Mode of Operation Options:
STEP THREE
Once the Mode of Operation is selected, press the“OK” button
For heated units only
STEP ONE
To Start: Press the Down Arrow button once.
NOTE: To change from “Mode” to “Fan Speed” press the down arrow twice.
STEP TWO
Use the Left and Right Arrows to scroll through the 8 available modes of operations
ON
3 Customizable Mode of Operation Options:
See www.berner.com/intelliswitch for programming directions
(Section 5, Program Menu).
www.berner.com Berner International 800.245.4455
111 Progress Ave. / New Castle / PA / 16101 / USA

Berner Architectural High Performance 10 Specifications

General

Brand	Berner
Model	Architectural High Performance 10
Category	Heater
Language	English