Page 4 of 44 17.07.2014
Ver. 3.3 © Berner Kochsysteme 2015
Description of warning symbols and indicators
General warning signals
If you don`t follow the safety instruction, you will place yourself in danger of
injuries
This symbol warning from dangerous voltage.
(Picture sign 5036 der IEC 60417-1)
This symbol warning from not-ionizing magnetic radiation.
(Picture sign 5140 der IEC 60417-1)
Warning symbols that are located directly on the equipment must always be
observed. Their readability must be ensured at all times.
Danger result from not observing the safety instructions
Not observing the safety instructions, may lead to danger for people, the surroundings, and
the induction unit itself. We are not liable for any damages caused by a failure to observe the
safety instructions.
In detail, ignore of the safety instruction can lead to risk of
For example:
- Risk of personal injuries as a result of electric factors
- Risk of personal injuries because of overheated pans (cookware)
- Risk of personal injuries because of overheated ceramic hob surface
Safe application
The safety instructions, the existing national regulations for electricity for the prevention of
accidents as well as any house work, application and safety regulations must be followed.
Improper use may result in minor injuries or
damages.
Before you connect or use the induction
unit, you have to read the Operation
To Next Page
Loading...
Need help?
General
