28
GB
55 65
Connect the machine to a power source as
illustrated.
Attention:
Unplug power cord when machine is not in
use.
Sewing light
Press main switch for power and light on. (1)
Position 0 - Machine is switched off.
Postion 1 - Machine and sewing light is
switched on.
Foot control
Foot control regulates the sewing speed. (2)
Attention:
Consult a qualified electrician if in doubt as to
connect machine to power source.Unplug
power cord when machine is not in use. The
appliance must be used with the foot
controller FC-9001, FC-9007, FC-9009 (220-
240V area), FC-9005 (110-127V area)
manufactured by ZHEJIANG FOUNDER
MOTOR Co., Ltd. (China).
IMPORTANT NOTICE
If the appliance has a polarized plug (one
blade is wider than the other). To reduce the
risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any
way. The optimal operation temperature for
the failure-free operation of this machine
must be 68°F +/- 50°F.
Connecting machine to
power source
EN
E55-E82e_EN_DE_TR_EL_310309:07_55-90e_EN_ES_FR_PT.qxd 31.3.2009 14:35 Seite 28
To Next Page
Loading...
