48
GB
Hold the upper thread with the left hand.
Turn the handwheel forward until the
needle is raised, (1) again.
Pull on the upper thread to bring the lower
thread up through the stitch plate hole. Lay
both threads to the back under the presser
foot. (2)
Note:
When the excess thread was cut, the
thread can be brought up, however does
not have to.
Caution:
When starting to sew do not pull on the
taut threads under the presser foot.
Bringing up the lower
thread
EN
E55-E82e_EN_DE_TR_EL_310309:07_55-90e_EN_ES_FR_PT.qxd 31.3.2009 14:35 Seite 48
To Next Page
Loading...
