Bernette Moscow 2 - Page 58

56
GB
   
If the decorative stitch patterns or
buttonhole are uneven when sewing with
particular fabrics, turn the feed balancing
dial with a coin or a screwdriver for
adjustment.
* This dial should usually be in a neutral
position. (1)
Adjusting distorted stretch stitch
patterns
If the patterns are too open, turn the dial
counterclockwise. (2) -
If the patterns are too close, turn the dial
clockwise. (2) +
Adjusting the stitch density of
buttonhole
If the stitches on the right side of the
buttonhole are too open, turn the dial
counterclockwise. (3) -
If the stitches on the right side of the
buttonhole are too close, turn the dial
clockwise. (3) +
Adjust pattern balanceEN
E55-E82e_EN_DE_TR_EL_310309:07_55-90e_EN_ES_FR_PT.qxd 31.3.2009 14:35 Seite 56