Bernhard BLADE RITE 1750 - Page 3

3
BLADE RITE 1750 MANUAL
© Bernhard and Company Limited
1.1 This machine is designed to perform the operation of single blade/relief grinding on reel
mower cutting units.
The machine should not be used for any other purposes other than those for which it was
designed.
1.2 This machine should be installed, operated and maintained by only competent personnel.
1.3 Before carrying out any work on the machine, other than actual grinding, isolate the
electrical power supply.
1.4 Always operate the machine with the spark guard in place. Always wear adequate eye, ear
and breathing protection.
1.5 Only use recommended grinding wheels specically designed for this type of grinding unit.
1.6 Never leave rags or tools on the machine, or allow combustible materials to accumulate
around the machine.
1.7 Always ensure that the unit to be ground is securely mounted on the machine with no
loose components.
1.8 Always ensure that all electrical connections are sound, with cables safely routed.
Stay alert. Wear suitable clothing. Never operate the machine when tired or under the
inuence of alcohol or drugs.
1. Safety