4
BLADE RITE 1750 MANUAL
© Bernhard and Company Limited
2. Assembling the Blade Rite 1750
2.1 You should receive this machine partly assembled.
2.2 Bolt the two support uprights to the top of the main chassis with the M12 hex bolts
provided. Do not fully tighten at this stage.
2.3 Slide the suspension and stop rod assemblies over the upper support rail.
Bolt the support bar between the support uprights tting the lift over guard at the same
time.
Guard
Guard
Spacer
Support Upright
Upper Stop
Adjustable Lower Stop Upper Support Rail M12 Hex Bolt
To Next Page
Loading...
