Bernina 900 - Using the Shell Hemmer; Shell Hemmer Settings; Corner Sewing with Shell Hemmer

Shell Hemmer
Hold corner
(together
with thread)
with
Ithumb
and forefinger
of the right hand
and
lay the
work near
the presser
foot
"/
I With thelefthand
hold thefirstfold
near
the
presser
foot
and
draw
through
the
spiral on the foot. Still holding
the fabric
taut draw it towards you
and lay the end
under
the
needle.
Stick
the
needle
in
and lower foot.
Sewing procedure
as
for normal hem-
ming.
To facilitate
sewing on the corner one
should
hold the tacked thread together
with the sewing thread
and pull gently
until
the
presser
foot
no longer
lies
on
the corner.
Y29
VIi:j
-
- -
--
--