Bernina 900 - Using the Lap Hemmer (Feller); Lap Hemmer Settings; Lap Hemmer First Operation; Lap Hemmer Second Operation

The
Lap
Hemmer
(Feller)
I JFirst
operation:
Pin
both piecesof fabric together
so that
U41
the piece underneath projects
by 3 mm
\ 4•
,•
(1/8
inch).
Fold
overlapping
piece
over
:
the
top piece
and slide
it under
the
pres-
ser
foot. Sew
a few stitches,
Leave
needle
in the
fabric, lift
presser
foot and
guide
fabric
into
the
foot.
,o
;80
When
sewing make
sure that
the same
width of material
enters the
feller all the
time.
Guide
the fabric
as you do
when
sewing
a
hem.
Second
operation:
Now
iron seam
well, guide
it again
into
the
feller and
sew the second
row
of
stiches. Pull
fabric slightly
sideways
on
both
sides
of the feller.
30