Bernina 900 - Using the Gatherer Foot; Gatherer Settings; Gatherer Calculation for Gather Amount

The
Gatherer
The
flat piece
of material
is inclined
to slipout
of the
slot. In
orderto
avoid this
the work
should be
guided
as shown
in
the
illustration,
by
holding
the
lower
piece
with
the
left
hand
and the upper
piece with the right
hand. Always pull slightly
"N
,towards
the right
hand corner
of the presser
foot.
I Calculation:
The amount
of
gather depends
on the
length of
the
stitch. The
longer
the stitch
the tighter
the gather.
For tight
gathering
the
upper piece
of material
can be pulled
W,
.
a little.
The
material
to be gathered
always
lies
under
the foot
and the
flat piece
in the
slot.
31