10
12/13/10
Zigzag Stitch
Select the Zigzag Stitch (width = 4, length = 2).
Finish one 6” edge using the following steps.
Guide the edge of the fabric under the middle of the presser foot
– or – Move needle position to the far right; sew using the inside
edge of the right toe as a guide.
The needle should go into the fabric on one stroke of the needle
and over the edge on the next stroke.
Tips
Do not use too long a stitch or too wide a stitch; the edge should
lie flat, not roll.
Match the weight of the thread to the weight of the fabric.
Fabric: Firm woven fabric, 4” x 6”
Needle: 80/12 Universal
Needle Position: As directed in instructions
BERNINA Presser Foot: Reverse Pattern Foot #1/1C/1D
bernette Presser Foot: Zigzag/Universal Foot
Do you know how to:
▪Adjust the stitch width?
▪Adjust the stitch length?
To Next Page
Loading...
Need help?
General
