12
12/13/10
Triple Straight Stitch
Fabric: Firm woven fabric, two pieces, 4” x 6” each
Needle: 80/12 Universal
Needle Position: As directed in instructions
BERNINA Presser Foot: Reverse pattern Foot #1/1C/1D and
Edgestitch Foot #10/10C/10D
(optional accessory)
bernette Presser Foot: Zigzag/Universal Foot
Attach Reverse Pattern Foot #1/1C/1D or bernette Zigzag/
Universal Foot to the machine.
Select the Triple Straight Stitch.
Position the edge of the fabric on the ⅝” marking on the stitch
plate. Sew the seam and press it open.
Change to Edgestitch Foot #10/10C/10D and adjust the needle
position to the far right.
With the guide of the foot in the ditch of the seam, sew the length
of the seam.
Adjust the needle position to the far left and stitch a second time,
again with guide of the foot in the ditch of the seam, sewing in
the same direction as before.
Do you know how to:
▪ Adjust the needle position?
▪ Use the stitch plate markings?
▪ Use Edgestitch Foot #10/10C/10D?
To Next Page
Loading...
Need help?
General
