14
12/13/10
Select the Super Stretch stitch.
Place the fabric pieces right sides together.
Position the edge of the fabric on the ⅝” marking on the stitch
plate; sew the seam and press it open.
Note: If the fabric is pulling and stretching as it is sewn, adjust
the presser foot pressure to a lower number to lighten the
pressure of the foot on the fabric and eliminate the stretching.
Fabric: Spandex, two pieces, 2” x 6” each
Needle: 80/12 Universal (Ballpoint may also be used)
Needle Position: As programmed
BERNINA Presser Foot: Reverse pattern Foot #1/1C/1D
bernette Presser Foot: Zigzag/Universal Foot
Do you know how to:
▪ Adjust the presser foot pressure?
Stretch Stitch
To Next Page
Loading...
Need help?
General
