17Setting up the sewing computer
Bringing up the lower thread
•
hold the upper thread
•
sew one stitch
•
pull the upper thread until the bobbin thread appears
in the stitch plate hole
•
pull bobbin thread out of the hole and insert both
threads through the slit in the presser foot towards the back
•
pull threads over the cutter
Note:
The bobbin thread must be
brought up through the stitch
plate for certain types of
work. The length of thread
is sufficient for most normal
work if the lower thread
cutter has been used.
Thread cutter
•
pull both threads from front to back over the
cutter
•
the threads release as soon as the first stitch is
sewn
To Next Page
