BERNSTEIN WC T620 Pro - Page 30

30
REMOTE CONTROL INSTRUCTIONS
WC Cover ipping:
Press the „WC Cover ipping“ button to control the opening and closing of the seat.
Eco mode:
After pressing the „Eco mode“ button, the seat temperature is automatically set to the lowest level.
In Eco mode, all light indicators are switched off. The seat sensor detects that someone is sitting, automatically stops
the energy-saving mode and automatically switches to energy-saving mode after the user has left the seat. Press the
„Eco mode“ button to switch the energy-saving mode functions on or off.
Night light function:
Control the night light on and off according to the light intensity of the bathroom by the light sensitivity of the toilet body.
Briey press the „Night light“ button to switch off the light-sensitive reaction function and long press the „Night light“
button to switch on the light-sensitive reaction function. The factory switches on the night light by default, briey press
the „Night light“ button to switch off or switch on the night light-always-on function.
Knob light:
Press the „Knob light“ button to switch it on or off.
Beep sound:
Press the „Beep sound“ button to switch it on or off.
Standby:
Press the button while not seated, the model will go into standby mode.
Combination button:
Long press the „Stop and WC cover ipping“ button to turn the automatic cover and seat closing function on or off.
Code adjustment:
Press „Code“ to enter the mode, the light ickers on Rear wash, Lady wash, water temperature,
then press „Water temperature“ to enter the respective basic settings.
You can press the „Stop“ key to complete the code operation.
BERNSTEIN SHOWER-WC T620 Pro