IMPORTANT: BEFORE TAKING FIRST MEASUREMENT
The thermometer needs to acclimate to the ambient environment (temperature) in which measurements will occur. It
is important to allow the JXB-178 to acclimate to the room temperature for at least 15 to 20 minutes prior to first using
the thermometer.
Subsequent usage – each time there is a significant change in the ambient temperature due to a change in the
environment, allow the JXB-178 to acclimate to this ambient temperature for at least 15 minutes prior to using it.
CHANGING TEMPERATURE MODE
While the thermometer is turned on, press the MODE button to toggle through the three temperature mode options:
BODY, SURFACE or ROOM.
NOTE: When first using the thermometer, the default is set to BODY mode.
NOTE: Measurement ranges for each temperature mode are as follows:
To Next Page
Loading...