To Next PageTo Next PageWhat to do if my Berrcom JXB-182 displays LO?
If your Berrcom Thermometer displays 'LO', it could be due to a few reasons. Ensure there's no hair or perspiration affecting the reading. Also, check for air drafts or significant changes in ambient temperature. Make sure to pause for at least 3-5 seconds (15 seconds recommended) between readings. Finally, maintain the recommended measuring distance of approximately 3-5 cm.
Why does my Berrcom JXB-182 show HI?
Your Berrcom Thermometer might display 'HI' for a few reasons, depending on the mode: In Body Temperature Mode, it means the measured temperature is higher than 43°C (109.4°F). In Surface Temperature Mode, it indicates a temperature above 60°C (140°F). In Room Temperature Mode, 'HI' appears if the ambient temperature exceeds 40°C (104°F).
General| Brand | Berrcom |
|---|---|
| Model | JXB-182 |
| Category | Thermometer |
| Language | English |
Steps to take a body temperature measurement using the On/Scan button.
Guidelines for ensuring accurate temperature measurements and common pitfalls to avoid.
Explanation of 'HI' and 'LO' messages and their causes.
