EN - 38
Replacing LED Lighting
Depending on the model, one or two LED
strip in the cooler is used to illuminate the
interior of your appliance.
To replace any of the LEDs, please
contact the nearest Authorised Service
Centre.
Note: The numbers and location of the LED
strips may change according to the model.
! Some versions may not include cooler
illumination.
Upper side LED strip
(In some models)
Left-Right side LED strip
(In some models)
6 SHIPMENT AND
REPOSITIONING
6.1 Transportation and Changing
Positioning
• The original packaging and foam may be
kept for re-transportation (optional).
• Fasten your appliance with thick
packaging, bands or strong cords and
follow the instructions for transportation
on the packaging.
• Remove all movable parts (shelves,
accessories, vegetable bins, and so on)
or x them into the appliance against
shocks using bands when re-positioning
or transporting.
Always carry your appliance in the
upright position.
To Next Page