Bertazzoni MAS304DFMXE - Gas Conversion: Step 2 - Surface Burners; Gas Conversion: Step 3 - Minimum Flame Adjustment; Minimum Flame Adjustment Warning

21




STEP2:SURFACEBURNERS
Toreplacethenozzlesofthesurfaceburners,lift
up the burners and unscrew the nozzles shipped
withtherangeusinga7mm{socketwrench).
Replacenozzlesusingtheconversionsetsupplied
with the range or by a Bertazzoni authorized
parts warehouse. Each nozzle has
 a number
indicating itsflow diameter printed on thebody. 
Consultthetableonpage20formatchingnozzles
toburners.






STEP3:MINIMUMFLAMEADJUSTMENT

WARNING!
Theseadjustmentsshouldbemadeonlyforuse
oftheappliancewithnaturalgas.Forusewith
liquidpropanegas,thechokescrewmustbe
fullyturnedinaclockwisedirection.

SURFACEBURNERS
1. Light one burner at a time and set the
knob
totheMINIMUMposition(smallflame).
2. Removetheknob.
3. The range is equipped  with a  safety valve.
Using a small‐sizeslotted screwdriver, locate
the choke valve on the valve body and turn
the choke screw to the right or left until the
burnerflameisadjustedto
desiredminimum.
4. Make sure that the flame does not go out
when switching quickly from the MAXIMUM
totheMINIMUMposition.


