Bertazzoni Master Series - Auxiliary Oven Preheating and Bake Mode

49
EN
performed only after the door panel has
been adjusted.
REMOVING THE FRIDGE DOOR PANEL
• Set the tension level of the hinge to "0".
CAUTION:
Failure to set the hinge to "0" before
continuing the installation may result in
injury.
• Remove the side closing seals.
• Loosen the 2 screws in the upper cover of the
fridge door and remove it.
• Take out the upper adjustment kits.
• Loosen the 2 screws in the lower cover of the
fridge door and remove it.