Bestop Twill Replace-a-top - 19. Secure Quarter Window; 22. Install Tailgate Bar on Rear Window

Twill Replace-a-top™ with Tinted Windows – Installation Instructions
Rev. C 0314 79837 pg. 7
Secure Top above Door
Openings
Close the zipper and slip the plastic along the
bottom of the Side Window into the channel on the
vehicle.
Fasten the hook and loop strip above the window
to the top.
Roll Plastic into
Channel
Fasten Hook
and Loop
Slip the plastic strips above the doors into the
channel on the vehicle.
Roll Plastic into
Channel
Secure Quarter Window
Snap the Elastic Garters to the snaps on the Rear
Bow above the rear window opening.
Install Elastic Garters
Snap Elastic Garters
to Rear Bow
Remove the Rear Window from the box and
lay it fl at with the backing side up. Locate the
Tailgate Bar set aside in Step One. The bar has
a “C” shaped channel, when viewed from the
end. Orient the bar with the round seal down
and slide the “C” channel on the retainer onto
the tubed strip sewn to the backing side of the
Rear Window.
Rear Window -
Backing Side
Tailgate Bar
Tailgate
Retainer
Channel
Tubed
Strip
Install Tailgate Bar on
Rear Window