Twill Replace-a-top™ with Tinted Windows – Installation Instructions
Rev. C 0314 79837 pg. 6
Roll Plastic Strip into
channel in retainer
Secure Front of
Quarter Window
Attach Quarter Window Zippers
Start the zipper on the Quarter Window and close it
1-2 inches.
Start Zipper on
Quarter Window
Roll the plastic strip along the front of the Quarter
Window into the channel in the Door Surround.
Pull down gently on the Rear Bow and work the
plastic sewn to the rear corners of the top into the
retainer on the vehicle.
Pull down gently
on the Rear Bow
and slip plastic into
retainer
Secure Rear Corners
Close the header latches to secure the front of the
top to the windshield. Catch the hook in the loop in
the windshield frame and then close the lever over
it so that it lays fl at against the windshield frame.
Secure Header to Windshield
Windshield
Frame
Windshield
Header Latch
Close lever over top of hook to
lay fl ush with windshield frame
Catch hook
in loop
To Next Page
Loading...
