User’s instructions
19
English
• To reduce the risk of personal injury, use only the two steel screws
(and lock washer) provided with outlet box for mounting.
• To reduce the risk of personal injury, do not bend the blade holders
when installing the holders, balancing the blades or cleaning the fan.
OPERATION - General
The appliance is intended only for domestic use,
not for professional use.
1. Mounting Plate
2. Down rod
3. Motor
4. Blade
5. Blade holder
6. Canopy
ASSEMBLY - Installing the fan
• Be sure to hang the fan in a place where the distance between the fan blades and the floor will be at
least 2.30m.
• Mount the outlet box to the ceiling or used existing box. In order to ensure proper support, use two
wood screws, to secure the outlet box to a joist or beam. If the location you have chosen doesn’t
have a suitable support beam, install a 2”X4” brace between ceiling joists to support fan.
CE DECLARATION OF CONFORMITY
This product conforms to the essential requirements of the following EU safety directives:
• EMC Directive 2004/108/EC
• Low Voltage Directive 2006/95/EC
R. Neyman
Quality control
1
6
2
3
5
4
To Next Page
Loading...
