Why is the water in my Bestway Spa Accessories not clean?
Several factors can result in unclean water in your Bestway Spa Accessories. You might not be filtering for long enough, so increase filtration time. The filter cartridge may be dirty, requiring cleaning or replacement. Additionally, the titanium plate may be coated, so you should clean the titanium plate.
What to do if Lay-Z-Massage System does not work in Bestway Spa Accessories?
If the Lay-Z-Massage System in your Bestway Spa Accessories isn't working, the air pump may be overheating. Unplug the pump and wait two hours for it to cool down, then plug it back in and press the Lay-Z-Massage system button. Alternatively, the Lay-Z-Spa Massage may have stopped automatically; in this case, press the Lay-Z-Massage system button to reactivate it.
What to do if HydroJet System does not work in Bestway Spa Accessories?
If the HydroJet System isn't working in your Bestway Spa Accessories, the water pump might be overheating. Unplug the pump and wait two hours until it cools down, then plug it back in and try again.
How to unlock the control panel on Bestway Spa Accessories?
If the control panel on your Bestway Spa Accessories is not working, it may have auto-locked after 5 minutes of inactivity. If the lock icon is highlighted on the LED display, press the button for 3 seconds to unlock it. If it remains locked, restart the pump by unplugging it and plugging it back in, then press the on/off button for 2 seconds.
To Next Page
General